PVC Pipe Drains Vents and Wastewater

DWV PVC Pipe is Strong and Reliable. Drain waste and Vent Pipes are available in 6m lengths with a full range of fittings - AS/NZS 1260:2009 Standard

NZD $14.00$29.00
-1
Part No:  P40-6 
DWV Pipe – 40mm – 6m
DWV Pipe Drains Vent and Waste
SKU:  DWV-P40-6
-1
Part No:  P50-6 
DWV Pipe – 50mm – 6m
DWV Pipe Drains Vent and Waste
SKU:  DWV-P50-6
-1
Part No:  P80-6 
DWV Pipe – 80mm – 6m
DWV Pipe Drains Vent and Waste
SKU:  DWV-P80-6
-1
Part No:  P100-6 
DWV Pipe – 100mm – 6m SN6
DWV Pipe Drains Vent and Waste
SKU:  DWV-P100-6

DWV PVC Pipe is manufactured from strong durable UV protected PVC-U - ERA Drain Waste and Vent Pipe meets AS/NZS 1260 Standard.

-->

DWV PVC Pipe - Drain Waste Vent Pipe

PVC Drain Waste and Vent Pipe has an incredibly smooth bore and minimal internal protrusions that means the installed system will have a long and trusted service life.

ERA PVC Drainage Waste and Vent Pipe is manufactured in China, ERA has been manufacturing pipe for the NZ market for over 10 years and have met all the standard and regulations. The same pipe is available in large New Zealand and Australian retailers (under another multiple brand names).

Sizes & Ratings

BPS Code Size Length SN Rating
P40-6 40mm Pipe 6m n/a
P50-6 50mm Pipe 6m n/a
P80-6 80mm Pipe 6m n/a
P100-6 100mm Pipe 6m SN6

PVC Pipe Applications

  • Above and Below Ground Drainage wastewater and Venting Pipes
  • Industrial Discharge
  • Abrasive mixes in mining and quarries
  • Chemical Transfer (see our UPVC - Chemical Resistance Chart)
  • Domestic house Sewer and Drains
  • Connecting Water Tanks (see our sister company - Big Water Tanks)

Features and Benefits

  • Drain Waste and Vent Pipes do not support combustion
  • PVC is non Conductive will not rot, corrode or breakdown
  • They are lightweight, making installation cheaper and easier
  • The pipes are sealed with PVC Glue / or Welding Compound that creates a water tight and extremely strong bond
  • Potable (drinking) water approved
  • Suitable for "charged" (unpressured and low height under 3m) lines i.e. filling water tanks from cutters
  • WaterMark Certificate of Conformity – Level 1
    Evaluated to: AS/NZS 1260:2009 - PVC-U pipes and fittings for drain, waste and Vent Application Certification No: WMK26022

Drain Installation

  • Pipe trenches should be a minimum of 100mm wider each side of the pipe to enable better compaction around the pipe
  • Check pipes are not damaged prior to installation and trench is free from debris and sharp objects
  • Back fill and compact around the pipe
  • Drains should be installed with a minimum 1:60 fall, less by design