DWV Pan Connectors

DWV Pan Connectors are strong and reliable. They are used to connect to our 40 to 100mm PVC Pipes

NZD $3.00 – $12.00
$3.00
Part No:  PAN100F 
DWV Pan Connector No Offset Female – 100mm
DWV PVC Straight Pan Coupling
1 - 4$3.005 - 9$2.7010+$2.40
SKU:  DWV-PAN100F
$7.00
Part No:  PAN100F-OFF20 
DWV Pan Connector 20mm Offset Female – 100mm
DWV PVC Offset Pan Coupling
1 - 4$7.005 - 9$6.3010+$5.60
SKU:  DWV-PAN100F-OFF20
$12.00
Part No:  PAN100M 
DWV Pan Connector No Offset Male – 100mm
DWV PVC Straight Pan Connector
1 - 4$12.005 - 9$10.8010+$9.60
SKU:  DWV-PAN100M
$12.00
Part No:  PAN100M-OFF20 
DWV Pan Conncetor 20mm Offset Male – 100mm
DWV PVC Offset Pan Connector
1 - 4$12.005 - 9$10.8010+$9.60
SKU:  DWV-PAN100M-OFF20
$9.00
Part No:  PAN100M-OFF60 
DWV Pan Conncetor 60mm Offset Male – 100mm
DWV PVC Offset Pan Coupling
1 - 4$9.005 - 9$8.1010+$7.20
SKU:  DWV-PAN100M-OFF60

DWV Pipe PVC Pan Connectors are strong and reliable. They are used to connect to our 40 to 100mm PVC Pipes.

Our PVC Couplings hava an incredibly smooth bore and minimal internal protrusions. Consequently, the installed system will have a long and trusted service life.

ERA PVC Drainage Waste and Vent Pipe and Fittings are manufactured in China. ERA has been manufacturing pipe for the NZ market for over 10 years and has met all standards and regulations. The same pipe and fittings are available from other large New Zealand and Australian retailers (sold under a number of other brand names).

PVC Coupling Features and Benefits
  • Drain Waste and Vent Pipes and Fittings do not support combustion
  • PVC is non Conductive will not rot, corrode or breakdown
  • They are lightweight, making installation cheaper and easier
  • The pipes and fittings are sealed with PVC Glue / or Welding Compound that creates a water tight and extremely strong bond
  • Potable (drinking) water approved
  • Suitable for "charged" (unpressured and low height under 3m) lines i.e. filling water tanks from cutters
  • WaterMark Certificate of Conformity – Level 1
    Evaluated to: AS/NZS 1260:2009 - PVC-U pipes and fittings for drain, waste and Vent Application Certification No: WMK26022

Drain Installation
  • Your pipe trenches should provide clearance of a minimum of 100mm on each side of the pipe to enable better compaction around the pipe
  • Check that the pipes and fittings are not damaged prior to installation and trench is free from debris and sharp objects
  • Back fill and compact around the pipe
  • Drains should be installed with a minimum 1:60 fall, less by design