DWV PVC Caps and PVC Clips

DWV Pipe PVC Caps and PVC Clips are strong and reliable. They are used to mount and to connect to our 40 to 100mm PVC Pipes.

NZD $1.00$3.50
-1
Part No:  CAP-100 
DWV – Threaded End Cap – 100mm
DWV PVC Threaded Cap 100mm
SKU:  DWV-CAP-100
-1
Part No:  DC100 
DWV Dust Cap 100
DWV PVC Dust Cap
SKU:  DWV-DC100
-1
Part No:  DC40 
DWV Dust Cap 40
DWV PVC Dust Cap
SKU:  DWV-DC40
-1
Part No:  DC50 
DWV Dust Cap 50
DWV PVC Dust Cap
SKU:  DWV-DC50
-1
Part No:  DC80 
DWV Dust Cap 80
DWV PVC Dust Cap
SKU:  DWV-DC80
-1
Part No:  KCLIP-100 
DWV Pipe Clip – P Shape – 100mm
DWV PVC Key Pipe Clip
SKU:  DWV-KCLIP-100
-1
Part No:  KCLIP-40 
DWV Pipe Clip – P Shape – 40mm
DWV PVC Key Pipe Clip
SKU:  DWV-KCLIP-40
-1
Part No:  PCLIP-100 
DWV Pipe Saddle – 100mm
DWV PVC Pipe Saddle
SKU:  DWV-PCLIP-100
-1
Part No:  PCLIP-40 
DWV Pipe Saddle – 40mm
DWV PVC Pipe Clip Saddle
SKU:  DWV-PCLIP-40
-1
Part No:  PCLIP-50 
DWV Pipe Saddle – 50mm
DWV PVC Pipe Clip Saddle
SKU:  DWV-PCLIP-50

DWV Pipe PVC Caps and PVC Clips are strong and reliable. They are used to mount and to connect to our 40 to 100mm PVC Pipes.

Our PVC Pipes hava an incredibly smooth bore and minimal internal protrusions. Consequently, the installed system will have a long and trusted service life.

ERA PVC Drainage Waste and Vent Pipe and Fittings are manufactured in China. ERA has been manufacturing pipe for the NZ market for over 10 years and has met all standards and regulations. The same pipe and fittings are available from other large New Zealand and Australian retailers (sold under a number of other brand names).

PVC Caps and PVC CLips Features and Benefits

  • Drain Waste and Vent Pipes and Fittings do not support combustion
  • PVC is non Conductive will not rot, corrode or breakdown
  • They are lightweight, making installation cheaper and easier
  • The pipes and fittings are sealed with PVC Glue / or Welding Compound that creates a water tight and extremely strong bond
  • Potable (drinking) water approved
  • Suitable for "charged" (unpressured and low height under 3m) lines i.e. filling water tanks from cutters
  • WaterMark Certificate of Conformity – Level 1
    Evaluated to: AS/NZS 1260:2009 - PVC-U pipes and fittings for drain, waste and Vent Application Certification No: WMK26022

Drain Installation

  • Your pipe trenches should provide clearance of a minimum of 100mm on each side of the pipe to enable better compaction around the pipe
  • Check that the pipes and fittings are not damaged prior to installation and trench is free from debris and sharp objects
  • Back fill and compact around the pipe
  • Drains should be installed with a minimum 1:60 fall, less by design