DWV Pipe 40 to 100mm PVC Bends

Our DWV Pipe PVC Bends are strong and reliable. They are used to connect our 100, 80, 50 and 40mm PVC Pipes at a number of convenient angles between 5 and 88 degrees. There are male, female and combinations.

NZD $1.00$10.00
-1
Part No:  B5-100 
DWV Bend – 100mm – 5°
DVW 5 degree bend
SKU:  DWV-B5-100
-1
Part No:  B11-100 
DWV Bend – 100mm – 11°
DVW 11 Degree Bend
SKU:  DWV-B11-100
-1
Part No:  B11-100MF 
DWV Bend – 100mm – 11° Male Female
DVW 11 Degree Bend Male Female
SKU:  DWV-B11-100MF
-1
Part No:  B15-100 
DWV Bend – 100mm – 15°
DVW 15 degree bend
SKU:  DWV-B15-100
-1
Part No:  B15-100MF 
DWV Bend – 100mm – 15° Male Female
DWV 15 Degree Bend Male Female
SKU:  DWV-B15-100MF
-1
Part No:  B22-100 
DWV Bend – 100mm – 22°
DVW 22 degree bend
SKU:  DWV-B22-100
-1
Part No:  B22-100MF 
DWV Bend – 100mm – 22° Male Female
DWV 22 Degree Bend Male Female
SKU:  DWV-B22-100MF
-1
Part No:  B30-100 
DWV Bend – 100mm – 30°
DVW 30 degree bend
SKU:  DWV-B30-100
-1
Part No:  B30-100MF 
DWV Bend – 100mm – 30° Male Female
DWV 30 Degree Bend Male Female
SKU:  DWV-B30-100MF
-1
Part No:  B42-100MF 
DWV Bend – 100mm – 42° Male Female
DWV 42 Degree Bend Male Female
SKU:  DWV-B42-100MF
-1
Part No:  B45-100 
DWV Bend – 100mm – 45°
DVW 45 degree bend
SKU:  DWV-B45-100
-1
Part No:  B45-100MF 
DWV Bend – 100mm – 45° Male Female
DWV 45 Degree Bend Male Female
SKU:  DWV-B45-100MF
-1
Part No:  B45-100-SA 
DWV Bend – 100mm – 45° Side Access
DVW 45 degree bend Inspection
SKU:  DWV-B45-100-SA
-1
Part No:  B60-100 
DWV Bend – 100mm – 60°
DVW 60 degree bend
SKU:  DWV-B60-100
-1
Part No:  B88-100 
DWV Bend – 100mm – 88°
DVW 88 degree bend
SKU:  DWV-B88-100
-1
Part No:  B88-100-INS 
DWV Bend – 100mm – 88° Inspection
DVW 88 degree bend Inspection
SKU:  DWV-B88-100-INS
-1
Part No:  B88-100MF 
DWV Bend – 100mm 88° Male Female
SKU:  DWV-B88-100MF
-1
Part No:  B88-100-SA 
DWV Bend – 100mm – 88° Side Access
DVW 88 degree bend Side Inspection
SKU:  DWV-B88-100-SA
-1
Part No:  B45-80 
DWV Bend – 80mm – 45°
DVW 45 degree bend
SKU:  DWV-B45-80
-1
Part No:  B45-80MF 
DWV Bend – 80mm – 45° Male Female
DWV 45 Degree Bend Male Female
SKU:  DWV-B45-80MF
-1
Part No:  B88-80 
DWV Bend – 80mm – 88°
DVW 88 degree bend
SKU:  DWV-B88-80
-1
Part No:  B45-50 
DWV Bend – 50mm – 45°
DVW 45 degree bend
SKU:  DWV-B45-50
-1
Part No:  B45-50MF 
DWV Bend – 50mm – 45° Male Female
DWV 45 Degree Bend Male Female
SKU:  DWV-B45-50MF
-1
Part No:  B88-50 
DWV Bend – 50mm – 88°
DVW 88 degree bend
SKU:  DWV-B88-50
-1
Part No:  B88-50-INS 
DWV Bend – 50mm – 88° Inspection
DVW 88 degree bend Inspection
SKU:  DWV-B88-50-INS
-1
Part No:  B88-50MF 
DWV Bend – 50mm 88° Male Female
SKU:  DWV-B88-50MF
-1
Part No:  B45-40 
DWV Bend – 40mm – 45°
DVW 45 degree bend
SKU:  DWV-B45-40
-1
Part No:  B45-40MF 
DWV Bend – 40mm – 45° Male Female
DWV 45 Degree Bend Male Female
SKU:  DWV-B45-40MF
-1
Part No:  B88-40 
DWV Bend – 40mm – 88°
DVW 88 degree bend
SKU:  DWV-B88-40
-1
Part No:  B88-40-INS 
DWV Bend – 40mm – 88° Inspection
DVW 88 degree bend Inspection
SKU:  DWV-B88-40-INS
-1
Part No:  B88-40MF 
DWV Bend – 40mm 88° Male Female
SKU:  DWV-B88-40MF

DWV Pipe PVC Bends are strong and reliable. They are used to connect our 40 to 100mm PVC Pipes at a number of convenient angles between 5 and 88 degrees. There are male, female and combinations.

Our PVC Bends hava an incredibly smooth bore and minimal internal protrusions. Consequently, the installed system will have a long and trusted service life.

ERA PVC Drainage Waste and Vent Pipe and Fittings are manufactured in China. ERA has been manufacturing pipe for the NZ market for over 10 years and has met all standards and regulations. The same pipe and fittings are available from other large New Zealand and Australian retailers (sold under a number of other brand names).

PVC Bend Features and Benefits

  • Drain Waste and Vent Pipes and Fittings do not support combustion
  • PVC is non Conductive will not rot, corrode or breakdown
  • They are lightweight, making installation cheaper and easier
  • The pipes and fittings are sealed with PVC Glue / or Welding Compound that creates a water tight and extremely strong bond
  • Potable (drinking) water approved
  • Suitable for "charged" (unpressured and low height under 3m) lines i.e. filling water tanks from cutters
  • WaterMark Certificate of Conformity – Level 1
    Evaluated to: AS/NZS 1260:2009 - PVC-U pipes and fittings for drain, waste and Vent Application Certification No: WMK26022

Drain Installation

  • Your pipe trenches should provide clearance of a minimum of 100mm on each side of the pipe to enable better compaction around the pipe
  • Check that the pipes and fittings are not damaged prior to installation and trench is free from debris and sharp objects
  • Back fill and compact around the pipe
  • Drains should be installed with a minimum 1:60 fall, less by design